10
Utility mode
10-12 Network Fax
Header/Footer Position
Administrator Setting >> Fax Setting >> Header/Footer Position
Set the method of specifying the sender information and the reception
information. (page 10-54)
*1
The setting value is different depending on the country.
Telephone Line Settings
Administrator Setting >> Fax Setting >> Telephone Line Settings
For the IP address fax function, set the [Number of Redial] and the [Redial
Interval]. These are normally shared with the fax function. For details of other
items related to the Telephone Line Setting, see User manual [Facsimile
Operations]. (page 10-57)
*1
The setting value is different depending on the country.
Item Description Available value
Header Posi-
tion
*1
Set a position in which the sender infor-
mation is printed.
The use of [Outside Body Text] is una-
vailable for the Internet Fax/IP Address
Fax. Even if set to [Outside Body Text],
the sender information is added to the
[Inside Body Text].
Inside Body Text / Out-
side Body Text
*
/ OFF
Footer Position Set the reception time and the reception
number if they are printed or not on the
document received. In the color mode of
the IP address fax, [Outside Body Text]
cannot be used. Even when set to [Out-
side Body Text], information received is
added to [Inside Body Text].
Inside Body Text / Out-
side Body Text / OFF
*
Item Description Available value
Number of Re-
dials
*1
Set the number of redials when no re-
sponse is available due to the other party
being busy.
0-7 (3 times*)
Redial Interval Set the intervals between the redials. 1-15 (3 min.
*
)
To Next Page
Loading...
Need help?
General
