Safety
19
Pos: 11.8 /BA/Sich erheit/EasyC ut/Sicherheit Ei nführung Eas yCut @ 3\mod_12 04553763950 _78.docx @ 708 12 @ 2 @ 1
4.11 Introduction
The disc mower is equipped with all safety devices (protective devices). However, it is not
possible to eliminate all potential hazards on this machine as this would impair its full functional
capability. Hazard warnings are attached to the machine in the relevant areas to warn against
any dangers. The safety instructions are provided in the form of so-called warning pictograms.
Important information on the position of these safety signs and what they mean is given below!
Pos: 11.9 /BA/Sich erheit/Überar beitete Warnhinw eiseGefahr - B eschädigte oder unlesbare Aufkl eber( 2012-0 7-26 14:29:51) @ 0\mod_119556 7214115_78.doc x @ 674 @ @ 1
Danger! - Danger zone of the machine
Effect: Danger to life or serious injuries.
• Immediately replace damaged or illegible adhesive labels.
• Following repair work, always attach appropriate adhesive safety stickers to all the
replaced, modified or repaired components.
• Never clean areas carrying an adhesive safety label using a high-pressure cleaner.
• Familiarise yourself with the statement of the warning pictograms. The adjacent text and
the selected location on the machine provide information on the special danger spots on
the machine.
Pos: 11.10 /BA/Sic herheit/Überarb eitete Warn hinweiseNach bestellung/ Anbri ngung Aufkleber (2 012-07-26 14: 46:05) @ 0\ mod_11956373 37107_78.doc x@ 1079 @ 33 @ 1
4.11.1 Re-Ordering the Adhesive Safety and Information Labels
Note
Every adhesive safety and information label is assigned an order number and can be ordered
directly from the manufacturer or from an authorized dealer (see Section "Contact").
4.11.2 Affixing the Adhesive Safety and Information Labels
Note - Affixing an adhesive label
Effect: Adhesion of the label
• The surface for affixing the adhesive label must be clean and free of dirt, oil and grease.
Pos: 11.11 /BA/--- ------ ------Seitenumbruch---- ------------ @ 0\m od_1196175311 226_0.docx @ 4 165 @ @ 1