Commissioning
22
Pos: 14.1 /Übersc hriften/Übersc hriften 1/A-E/Ers tinbetriebnahm e @ 0\mod_ 1196314201498_7 8.docx @ 585 5@ 1 @ 1
5 Commissioning
Pos: 14.2 /Übersc hriften/Übersc hriften 2/P-T/Spezi elle Sicher heitshinweise @ 0\mod_11966604 95760_78.doc x @ 9134 @ 2 @ 1
5.1 Special Safety Instructions
Pos: 14.3 /BA/Sich erheit/Gefahr enhinweise/Eins tellarbeiten / EinstellungenGefa hr- Einstellarbeite ng ezogene M aschinen @ 0\ mod_119971701 1038_78.docx @ 33980 @ @ 1
Danger! - Unexpected movements of the machine
Effect: Danger to life or serious injuries.
• Setting tasks must only be performed when the drive is switched off and the engine is at
a standstill!
• Switching off the engine
• Remove the ignition key.
• Secure the machine against the possibility of rolling back.
Pos: 14.4 /Übersc hriften/Übersc hriften 2/A-E/Ers tmontage @ 1\mod_12022262 61982_78.doc x@ 58270 @ 2 @ 1
5.2 First installation
Pos: 14.5 /BA/Sich erheit/Gefahr enhinweise/Gefa hr- Fehlerhafter Z usammenbau @ 1\mod_12022 24212591_78. docx @ 58171 @ @ 1
Danger! - Incorrect assembly
Effect: Danger to life, serious injuries or serious damage to the machine.
• Only authorised service centres may assemble the machine.
• The machine must be assembled with special care.
• Always heed the applicable accident prevention regulations.
• Use only safe and sufficiently dimensioned lifting equipment and load-securing
equipment.
• The machine may be taken into operation only after all the safety devices have been
installed.
• If unauthorised modifications are made to the machine, the manufacturer is released
from liability for any resulting damage.
Pos: 14.6 /BA/Sich erheit/Gefahr enhinweise/Gefa hr- Fehlende Sch utztücher Erstin betriebnah me@ 3\mod_12046 28072251_78.d ocx @ 7102 5@ @ 1
Danger! - Missing guard cloths
Effect: Lebensgefahr, schwere Verletzungen oder schwere Schäden an der Maschine.
• Before starting up the machine for the first time, install all supplied guard cloths on the
machine.
Pos: 14.7 /Abkürzu ngen /Abkürzu ngen sprach neutral/EasyCut/E asyCut F 280 M / EasyCut F 320 M / EasyCut F 3 60 M @ 103\ mod_13322367 42140_0.docx @ 941066 @ @ 1
(EasyCut F 280 M / EasyCut F 320 M/ EasyCut F 360 M)
Pos: 14.8 /BA/In betriebnahme/Ersti nbetriebnah me/Erstmontage @ 1\mod_12022 24111998_78.d ocx @ 5819 0@ @ 1
The document "Assembly Instructions" describes how to install the device for the first time.
Pos: 14.9 /BA/---- ------- ----Seitenumbruch----- ----------- @ 0\mo d_11961753112 26_0.docx @ 41 65 @ @ 1