Start-up
32
Pos: 16.24 /BA/I nbetriebnahme/ EasyCut/Probel auf nach Erstm ontage @ 3\ mod_12052159272 75_78.docx @ 7 3555 @ 12 @ 1
6.5 Trial run after first installation
Caution!
After the first connection to the tractor, the machine must undergo a trial run.
• The machine must be in working position
• Do not switch on the PTO until the machine is resting on the ground and you are
absolutely sure that there are no persons, animals or objects in the danger zone.
• Start a trial run of the machine from the driver’s seat of the tractor only.
• Lower the machine into working position.
• Carefully switch in the PTO of the tractor.
• Slowly increase the PTO speed to 1000 rpm.
• Check that the machine is running smoothly and without vibrations.
• Reduce the PTO speed to idling and wait for the cutting discs / mower drums to come to
a stansdstill.
• Raise or lower the machine via the tractor hydraulics.
Pos: 17 /BA/----- ---------- Seitenumbruch------ ---------- @ 0\mod_1 19617531122 6_0.docx @ 41 65@ @ 1
To Next Page
Loading...
Need help?
General
