Krone EasyCut F 360 Original Operation Instructions

Operation
35
Pos: 20.1 /Übersc hriften/Übersc hriften 1/A-E/Be dienung @ 0\ mod_1199789 505403_78.docx @ 34825 @ 1 @ 1
8 Operation
Pos: 20.2 /Übersc hriften/Übersc hriften 2/U-Z/Vor dem Mäheinsatz @ 3\mod_120 4788384465_78 .docx @ 73168 @ 2 @ 1
8.1 Before mowing
Pos: 20.3 /BA/Sich erheit/Gefahr enhinweise/M ähwerke/Gefahr - Ar beitseinsatz / M ähen @ 73\ mod_130769 5972255_78.doc x@ 654926 @ @ 1
DANGER! - Using the machine for work
Effect: Danger to life, injuries or damage to the machine.
• The glide skids must rest on the ground before start-up and during work
• Maintain an adequate safety distance from the cutting tools during operation
• There is danger of foreign objects being forcibly ejected even when the machine is
operated properly. Persons must therefore be directed out of the danger zone of the
machine.
• Special care should be taken when working near roads and buildings)
Pos: 20.4 /BA/Sich erheit/Gefahr enhinweise/M ähwerke/Gefahr - Un erwartete B ewegung der Sc hneidwerkze uge bzw. des Mä hwerkes @ 3\m od_12047887 56340_78.doc x@ 73207 @ @ 1
Danger! - Unexpected movement of the cutting tools or the mowing unit. Stones are
hurled up during operation
Effect: Danger to life, injuries or damage to the machine.
• Do not carry out work on the disc mower until the PTO has been switched off, the engine
has been turned off and the ignition key has been removed! Secure the tractor against
accidental start-up and against rolling!
• Support the lifted cutter bar! Never step under suspended loads!
• Before using the machine, always check the protective devices for damage. Replace
damaged protective devices immediately.
• Safe operation is only guaranteed if the blades have been fitted according to the
instructions!
• Before starting operation, always check the mowing unit for damaged, missing or worn
blades, retaining bolts, leaf springs and cutting discs/blade drum; replace any parts that
are damaged, missing or worn!
• Always replace missing and damaged blades in sets to prevent unbalanced rotation!
• Never install unevenly worn blades on a drum/disc!
• Whenever a blade is changed, also inspect the fasteners and, if required, replace them!
• Move the protective devices into their protective positions.
Pos: 20.5 /BA/Bedi enung /EasyC ut/Mähen/Hin weis Beim Mähe nFr ontmäh werke @ 33\mod_1 25411793401 8_78.docx @ 318 312 @ 2 @ 1
Note while mowing
Effect: Proper use of the machine
• Change the front power lift to single-acting (only lifting, no pressing). The lowering of the
mowing unit results from the dead weight of the mowing unit. The mowing unit must not
be additionally loaded over the front power lift.
• During work the hydraulic control lever for the front power lift must be set to “Float
position“.
Pos: 20.6 /BA/Bedi enung /EasyC ut/Mähen/Absp errhahn für di eFro nthydrauli k des Traktors lös en. @ 33\mod_ 125411905809 6_78.docx @ 3 18361 @ @ 1
• Open the shut-off valve for the front hydraulic of the tractor.
Pos: 20.7 /BA/---- ------- ----Seitenumbruch----- ----------- @ 0\mo d_11961753112 26_0.docx @ 41 65 @ @ 1

Krone EasyCut F 360 Specifications

General

Brand	Krone
Model	EasyCut F 360
Category	Lawn Mower
Language	English