MAINTENANCE WORK ON CHASSIS AND ENGINE 109
700259-01
– Remove bleeder screws briefly.
Any excess pressure escapes from the interior of the fork.
– Mount and tighten bleeder screws.
Info
Perform this action on both fork legs.
9.10Compression damping of the shock absorber
700340-01
The shock absorber can coordinate the compression damping separately in the low and
high speed range (Dual Compression Control).
The term low and high speed refers to the movement of the shock absorber during compres-
sion and not the riding speed of the motorcycle.
The low and high speed adjustment works for all areas.
9.11Adjusting the low-speed compression damping of the shock absorber
Danger
Danger of accidents The shock absorber is under high pressure.
– The shock absorber is filled with highly compressed nitrogen, so never dismantle the shock absorber or carry out any mainte-
nance on it yourself.
To Next Page
Loading...
Need help?
General
