MAINTENANCE WORK ON CHASSIS AND ENGINE 189
9.76Adjusting the rear frame position
Warning
Danger of accidents Modifications to the chassis can seriously alter the vehicle's handling characteristics.
– Following modifications, ride slowly at first to get the feel of the new handling characteristics.
– Remove the seat. ( p. 154)
700363-01
– Remove screws with the bushings.
700327-10
Setting a higher seat position:
– Remove screw with washer on the left and right sides of the vehicle.
– Push the rear end down until the drill holes of the frame are level with the lower
front drill holes of the rear.
To Next Page
Loading...
Need help?
General
