KTM 450 EXC-F Six Days 2017 User Manual

15 ELECTRICAL SYSTEM 98
Finishing work
– Check the headlight setting. ( p. 99)
15.8 Changing the headlight bulb
Note
Damage to reflector Reduced brightness.
– Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
Preparatory work
– Remove the headlight mask with the headlight. ( p. 97)
E00358-10
Main work
–
Turn protection cap

together with the underlying bulb socket counterclockwise
all the way and remove it.
–
Pull bulb socket

of the parking light out of the reflector.
E00359-10
–
Pull out headlight bulb

.
– Insert the new headlight bulb.
Headlight (HS1 / socket PX43t) ( p. 120)
– Insert the protection cap with the bulb socket into the reflector and turn it clock-
wise all the way.
Info
Ensure that O-ring

is seated properly.
– Insert the bulb socket of the parking light into the reflector.
Finishing work
– Install the headlight mask with the headlight. ( p. 97)
– Check the headlight setting. ( p. 99)
15.9 Changing the turn signal bulb
Note
Damage to reflector Reduced brightness.
– Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.

KTM 450 EXC-F Six Days 2017 Specifications

General

Brand	KTM
Model	450 EXC-F Six Days 2017
Category	Motorcycle
Language	English