KTM 450 EXC-F Six Days 2017 User Manual

16 COOLING SYSTEM 103
H01700-11
Main work
– Position the motorcycle upright.
– Place a suitable container under the water pump cover.
–
Remove screw

. Take off radiator cap

.
– Completely drain the coolant.
–
Mount and tighten screw

with a new seal ring.
Guideline
Screw, water pump cover M6 10 Nm (7.4 lbf ft)
16.5 Refilling coolant
Warning
Danger of poisoning Coolant is toxic and a health hazard.
– Keep coolant out of the reach of children.
– Do not allow coolant to come into contact with the skin, the eyes and clothing.
– Consult a doctor immediately if coolant is swallowed.
– Rinse the affected area immediately with plenty of water in the event of contact with the skin.
– Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
– Change clothing if coolant spills onto your clothing.
H01698-10
Main work
–
Make sure that the screw

is tightened.
– Stand the vehicle upright.
–
Pour coolant in up to measurement

above the radiator fins.
Guideline
10 mm (0.39 in)
Coolant 1.2 l (1.3 qt.) Coolant ( p. 124)
– Refit the radiator cap.
Finishing work
(EXC‑F Six Days, EXC‑F AU)
– Install the engine guard. ( p. 78)
– Take a short test ride.
– Check the coolant level. ( p. 102)

KTM 450 EXC-F Six Days 2017 Specifications

General

Brand	KTM
Model	450 EXC-F Six Days 2017
Category	Motorcycle
Language	English