KTM 450 EXC-F Six Days 2017 User Manual

18 SERVICE WORK ON THE ENGINE 111
H01713-10
–
Remove filler plug

with the O-ring from the clutch cover and fill up with engine
oil.
Engine oil 1.2 l (1.3 qt.) Engine oil (SAE 10W/50) ( p. 124)
Info
Too little engine oil or poor-quality engine oil results in premature wear of
the engine.
– Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and death.
– Always make sure there is sufficient ventilation when running the
engine.
– Use an effective exhaust extraction system when starting or running the
engine in an enclosed space.
– Start the engine and check that it is oil-tight.
Finishing work
(EXC‑F Six Days, EXC‑F AU)
– Install the engine guard. ( p. 78)
– Check the engine oil level. ( p. 108)
18.4 Adding engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
H01712-10
Main work
–
Remove the oil filler plug

with the O-ring from the clutch cover.
–
Fill engine oil to the middle

of the level viewer.
– Add the same engine oil that was used when the motor was changed.
Engine oil (SAE 10W/50) ( p. 124)
Info
For optimal performance of the engine oil, do not mix different types of
engine oil.
If appropriate, change the engine oil.
– Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and death.
– Always make sure there is sufficient ventilation when running the
engine.
– Use an effective exhaust extraction system when starting or running the
engine in an enclosed space.
– Start the engine and check that it is oil-tight.
Finishing work
– Check the engine oil level. ( p. 108)

KTM 450 EXC-F Six Days 2017 Specifications

General

Brand	KTM
Model	450 EXC-F Six Days 2017
Category	Motorcycle
Language	English