7 COMBINATION INSTRUMENT
30
Info
Repeatedly press the button briefly until the desired
function is reached.
If no button is pressed for 20 seconds, the settings are
automatically saved.
Briefly press
the button .
Activates the flashing display and changes to
the next display
Press the but-
ton for 2–3
seconds.
No function
Briefly press
the button .
Deactivates the flashing display and changes to
the next display
Press the but-
ton for 2–3
seconds.
No function
Wait 3 - 5
seconds.
Changes to the next display without changes
Wait 10 - 12
seconds.
Setup menu starts, stores the settings, and
changes to H or ODO.
7.10 Adjusting the unit of measurement
400329-01
Condition
• The motorcycle is stationary.
– Repeatedly press the button briefly until H appears at the
bottom right of the display.
–
Press the button for 2–3 seconds.
– Repeatedly press the button briefly until Km/h/Mph flashes.
In measurement unit mode, you can change the unit of measure-
ment.
Info
If no button is pressed for 5 seconds, the settings are auto-
matically saved.
Briefly press
the button .
Starts selection, activates Km/h display
Press the but-
ton for 2–3
seconds.
No function
Briefly press
the button .
Activates Mph display
Press the but-
ton for 2–3
seconds.
No function
Wait 3 - 5
seconds.
Changes to the next display, changes from
selection to the Setup menu
Wait 10 - 12
seconds.
Stores and closes the Setup menu
To Next Page
Loading...
Need help?
General
