7 COMBINATION INSTRUMENT
104
Info
Do not open the throttle when switching on or off.
After the ignition is switched on, motorcycle traction
control is enabled again.
Press and
hold the SET
button for 3 -
5 seconds.
Activation of the motorcycle traction control.
7.24.23 ABS
F01807-01
– Press the SET button when the menu is closed.
– Press the UP or DOWN button until Motorcycle is marked. Press
the SET button to open the menu.
– Press the UP or DOWN button until ABS is marked. Press
the SET button to open the submenu.
– Activate the menu item using the UP or DOWN button.
– Press the SET button to switch off ABS or to select the desired
ABS mode.
To Next Page
Loading...
Need help?
General
