REAR FORK
REMOVAL
Remove the exhaust muffler. (
!
2-6)
Remove the rear brake caliper. (
!
15-3)
Remove the right rear shock absorber lower
mount bolt.
Remove the rear axle nut and remove the
collar.
Remove the rear fork.
The installation sequence is the reverse of
removal.
Turn the inner race of each bearing with your
finger to see if they turn smoothly and
quietly.
Also check if the outer race fits tightly in the
hub.
Replace the bearings if the races do not turn
smoothly, quietly, or if they fit loosely in the
hub.
REAR WHEEL
REMOVAL
Remove the exhaust muffler. (
!
2-6)
Remove the rear brake caliper. (
!
15-3)
Remove the rear fork.
Remove the rear axle collar.
Remove the rear wheel.
INSPECTION
Measure the rear wheel rim runout.
Service Limits:
Radial: 2.0mm replace if over
Axial: 2.0mm replace if over
To Next Page
Loading...
Need help?
General
