5-31
Operation on the Machine > Handling Destination
Destination Search
The destination can be searched by name.
1 [Menu] > [ā²] [ļ±] key > [Search (Name)] > [OK] key
2 Enter characters to search using the numeric keys.
3 Select the [OK] key.
The searched destination is displayed.
3
Select the [OK] key.
To send to multiple destinations, repeat steps 1 to 3. You can send to as many as 100
destinations at once.
Destinations can be changed later.
Choosing from the External Address Book
1
Display the screen.
1 In the basic screen for sending, select[Address Book] key [Menu] > [ā²] [ā¼] key >
[Switch Addr Book] > [OK] key
2 [ā²] [ā¼] key > Select external address book > [OK] key
2
Select the destinations.
1 Select the destination.
For details on entering characters, refer to the following:
Character Entry Method (page 11-8)
Confirmation Screen of Destinations (page 5-34)
For details on the External Address Book, refer to the following:
Command Center RX User Guide
When checking information of the destination, select [Menu] > [Details] > [OK] key
To Next Page
Loading...
Need help?
General
