6-9
Using Various Functions > Functions
Collate
Offsets the output by page or set.
(Value: [Off] / [On])
Duplex
Produces two-sided prints. You can also create single-sided copies from two-sided originals.
The following modes are available.
One-sided to Two-sided
• You can conveniently select in advance the size and type of paper that will be used often and set them as default.
MP Tray Set. (Multipurpose Tray Settings) (page 8-23)
• If the specified size of paper is not loaded in the paper source cassette or multipurpose tray, a confirmation screen
appears. Load the required paper in the multipurpose tray and select [
OK
] to start copying.
Produces two-sided copies from one-sided originals. In case of an odd
number of originals, the back side of the last copy will be blank.
The following binding options are available.
A Binding Left/Right: Images on the second sides are not rotated.
B Binding Top: Images on the second sides are rotated 180 degrees.
Copies can be bound on the top edge, facing the same orientation
when turning the pages.
ghi
def
abc
ghi
abc
def
ghi
abc
def
To Next Page
Loading...
Need help?
General
