11-6
Appendix > Optional Equipment
Optional Applications
The applications listed below are installed on this machine.
Starting Application Use
1
Display the screen.
1 [System Menu/Counter] key > [ā²] [ā¼] key > [System/Network] > [OK] key
2 [ā²] [ā¼] key > [Op Functions] > [OK] key
2
Activate the application.
1 Select the desired application, and select the [OK] key.
2 [ā²] [ā¼] key > [Official] > [OK] key
To use the application as a trial, select [Trial] without entering the license key.
3 Enter the license key > [OK] key
Some applications do not require you to enter a license key. If the license key entry screen does not
appear, go to Step 6.
Application
Card Authentication Kit
ThinPrint Option
*1
*1 This can be used on a trial basis for a limited time.
ā¢ Restrictions such as the number of times the application can be used during the trial period differ depending on the
application.
ā¢ If you change the date/time while using the trial version of an application, you will no longer be able to use the
application.
If the login user name entry screen appears during operations, enter a login user name
and password, and select [
Login
]. For this, you need to login with administrator privileges.
The factory default login user name and login password are set as shown below.
You can view detailed information on the selected application by selecting [Menu] >
[ā²][ā¼] key > [Detail] > [OK] key.
Model Name Login User Name Login Password
ECOSYS M2135dn/ECOSYS M2635dn/
ECOSYS M2635dw
3500 3500
ECOSYS M2040dn/ECOSYS M2540dn/
ECOSYS M2540dw
4000 4000
To Next Page
Loading...
Need help?
General
