2PX/2PY
1-3-6
(3) Contents of the maintenance mode items
Item No. Description
U000 Outputting an own-status report
Description
Outputs lists of the current settings of the maintenance items and paper jam and service call
occurrences. Outputs the event log. Also sends output data to the USB memory.
Purpose
To check the current setting of the maintenance items, or paper jam or service call occurrences.
Before initializing or replacing the backup RAM, output a list of the current settings of the mainte-
nance items to reenter the settings after initialization or replacement.
Method
1. Press the start key.
2. Select the item to be output.
3. Press the start key. A list is output.
Method: Send to the USB memory
1. Press the power key on the operation panel, and after verifying the main power indicator has
gone off, switch off the main power switch.
2. Insert USB memory in USB memory slot.
3. Turn the main power switch on.
4. Enter the maintenance item.
5. Press the start key.
6. Select the item to be send.
7. Select [Text] or [HTML].
8. Press the start key.
Output will be sent to the USB memory.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display Output list
Maintenance List of the current settings of the maintenance modes
User Status Outputs the user status page
Svc Status Outputs service status page
Event Outputs the event log
NW Status Outputs network status page
All Outputs the all reports
Display Output list
Print Outputs the report
USB (Text) Sends output data to the USB memory (text type)
USB (HTML) Sends output data to the USB memory (HTML type)
To Next Page
Loading...
Need help?
General
