Kyocera ECOSYS M6026cidn User Manual

2PX/2PY
1-3-58
U632 Setting communication control 3
Description
Makes settings for fax transmission regarding the communication.
Method
1. Press the start key.
2. Select the item to be set.
Setting the DIS signal to 4 bytes
Sets if bit 33 and later bits of the DIS/DTC signal are sent.
1. Select the setting.
* : Initial setting: Off
2. Press the start key. The setting is set.
Setting the CNG detection times in the fax/telephone auto select mode
Sets the CNG detection times in the fax/telephone auto select mode.
1. Select the setting.
* : Initial setting: 2Time
2. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
DIS 4Byte Sets the DIS signal to 4 bytes.
Num OF CNG(F/T) Sets the CNG detection times in the fax/telephone auto select
mode.
Display Description
On Bit 33 and later bits of the DIS/DTC signal are not sent.
Off Bit 33 and later bits of the DIS/DTC signal are sent.
Display Description
1Time Detects CNG once.
2Time Detects CNG twice.

Kyocera ECOSYS M6026cidn Specifications

General

Brand	Kyocera
Model	ECOSYS M6026cidn
Category	All in One Printer
Language	English