Kyocera KM-3035 User Manual

Section 7 COPIER MANAGEMENT FUNCTIONS
(2) Accessing the machine default settings
Perform the following procedure when you want to access the
screens for each of the various machine default settings.
1
With the content of the “Basic” tab displayed, press the
[Default Setting/Counter] key.
The “Default setting”screen will be displayed.
2
Touch the “Machine default” key on the left side of the touch
panel.
Inch specifications
Default setting
Copy
default
Machine
default
Language Management
End
BOX
Management
Bypass
setting
Document
Management
Register
orig. size
Print
report
Counter
check
User
Adjustment
Default setting / Counter
Metric specifications
Default setting
Copy
default
Machine
default
Language Management
End
Hard Disk
Management
Bypass
setting
Document
Management
Register
orig. size
Print
report
Counter
check
User
Adjustment
Default setting / Counter
3
Use the keypad to enter the 4-digit management code.
The factory default setting for 30 cpm copiers is “3000”, for
40 cpm copiers is “4000” and for 50 cpm copiers is “5000”.
Inch specifications
Enter the administrator number
Close
Metric specifications
Enter the administrator number
Close
4
If the entered code matched the registered one, the
“Machine default” screen will be displayed.
Inch specifications
Machine default
Auto drawer switching
Paper size (1st drawer)
Paper size (2nd drawer)
Paper size (3rd drawer)
Paper size (4th drawer)
On / All types of paper
Auto / Inch
Auto / Inch
Auto / Inch
Auto / Inch
Default menu
Down
Change #
Close
Setting mode
Up
Default setting
Default setting / Counter
Metric specifications
Machine default
Auto cassette switching
Paper size (1st cassette)
Paper size (2nd cassette)
Paper size (3rd cassette)
Paper size (4th cassette)
On / All types of paper
Auto / Centimeter
Auto / Centimeter
Auto / Centimeter
Auto / Centimeter
Up
Down
Change #
Close
Default setting
Default menu Setting mode
Default setting / Counter
NOTES
• It is possible for you to change the 4-digit management code.
(See “Changing the management code” on page 7-56.)
• Refer to the desired procedure(s) explained under “(3) Making
machine default settings” and perform the corresponding setting(s).
7-41

Kyocera KM-3035 Specifications

General

Print Technology	Laser
Type	Monochrome
Resolution	600 x 600 dpi
Duplex Printing	Yes
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan
Print Speed	30 ppm
Automatic Document Feeder (ADF)	Yes
Copy Speed	30 cpm
Reduction/Enlargement	25% - 400%
Connectivity	USB 2.0, Ethernet
Operating System Compatibility	Windows
Fax Transmission Speed	33.6 kbps (Optional)