GS14/GS16, Operation
37
4.1.5 Connecting to a Personal Computer
Description Windows Mobile Device Center for PCs with Windows 7/Windows 8/Windows 10 oper-
ating system is the synchronization software for Windows mobile-based pocket PCs.
WMDC enables a PC and a Windows mobile-based pocket PC to communicate.
Leica USB drivers support Windows 7, Windows 8 (8.1) and Windows 10 operating
systems.
Cables
Leica USB drivers support:
Uninstalling the
previous drivers
Skip the following steps if you have never installed Leica USB drivers before.
If older drivers were previously installed on the PC, follow the instructions to un-install
the drivers prior the installation of the new drivers.
Name Description
GEV223 USB data cable, 1.8 m, connects instrument to Mini-USB to USB
GEV234 USB data cable, 1.65 m, connects CS to GS or CS to PC (USB)
GEV261 Y-cable, 1.8 m, connects instrument to PC – battery
Step Description
1. Connect your instrument to the PC via cable.
2. On your PC, select to Control Panel > Device Manager.
3. In Network Adapters, right-click on Remote NDIS based LGS….
4. Click on Uninstall.
5. Set Delete the driver… as checked. Press OK.
To Next Page
Loading...
Need help?
General
