Lenze 8400 BaseLine C User Manual

1 About this documentation
1.1 Document history
8
Lenze · 8400 BaseLine C · Reference manual · DMS 1.6 EN · 01/2014 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1 About this documentation
This documentation contains information on the parameterisation of the 8400 BaseLine C control-
ler using the integrated keypad and the L-force »Engineer«.
The information in this documentation is valid for the 8400 BaseLine C controller with the following
nameplate data:
Depending on the software version of the controller and the version of the installed »Engineer«
software, the screenshots in this documentation may differ from the representation in the »Engi-
neer«.
 Tip!
Information and tools around the Lenze products can be found in the Download area on
http://www.Lenze.com
1.1 Document history
 Danger!
The controller is a source of danger which may lead to death or severe injury of persons.
To protect yourself and others against these dangers, observe the safety instructions be-
fore switching on the controller.
Please read the safety instructions in the mounting instructions and the hardware ma-
nual of the 8400 BaseLine C controller. Both documents are supplied with the controller.
Product series Type designation From software version
8400 BaseLine C E84AVBCxxxxxxxx 01.00
Version Description
1.6 01/2014 TD05 Error corrections & supplements and converted to new layout
1.5 04/2013 TD05 Error corrections & supplements, parameter reference V03.04.00
1.4 04/2011 TD05 Error corrections & supplements, parameter reference V03.03.00
1.3 09/2010 TD05 Restructuring of some chapters, error corrections & supplements
1.2 11/2009 TD06 Error corrections
1.1 05/2009 TD06 Error corrections
1.0 04/2009 TD06 First edition

Lenze 8400 BaseLine C Specifications

General

Brand	Lenze
Model	8400 BaseLine C
Category	Inverter
Language	English