Lenze 8400 BaseLine C User Manual

5 Motor control (MCTRL)
5.5 Sensorless vector control (SLVC)
88
Lenze · 8400 BaseLine C · Reference manual · DMS 1.6 EN · 01/2014 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.5.1 Parameterisation dialog
 Proceed as follows to open the dialog for parameterising the motor control:
1. »Engineer« Go to the Project view and select the 8400 BaseLine C controller.
2. Go to Workspace and change to the Application parameters tab.
3. Select the motor control "4: SLVC: Vector control" from the Overview dialog level in the
Motor control (C006
) list field.
4. Click the Motor control vector button to change to the Overview  Motor control vector di-
alog box.
• This dialog level lists shows all relevant parameters in a parameter list.
Short overview of the relevant parameters:
Parameter Info
C006
Selection of the motor control
 "4: SLVC: Vector control"
C011
Reference speed
C018
Switching frequency
C021
Slip compensation
C022
Imax in motor mode
C023
Imax in generator mode
C050 Speed setpoint
C057 Maximum torque
C058 Output frequency
C081
Rated motor power
C084
Motor stator resistance
C085
Motor stator leakage inductance
C087
Rated motor speed
C088 Rated motor current
C089
Rated motor frequency
C090
Rated motor voltage
C091 Motor cosine phi
C092
Motor magnetising inductance
C095
Motor magnetising current
C097
Rated motor torque
C105
Deceleration time - quick stop
C909/1
Max. pos. speed
C909/2
Max. neg. speed
C910/1
Max. pos. output frequency
C910/2
Max. neg. output frequency
Highlighted in grey = display parameter

Lenze 8400 BaseLine C Specifications

General

Brand	Lenze
Model	8400 BaseLine C
Category	Inverter
Language	English