Lenze E84DGDVB7514 User Manual

Product description
Overview of control terminals
3

25
EDS84DG752 EN 5.0
3.5 Overview of control terminals
The control terminals of the 8400 motec controllers are available in the entire system in
two versions:
ƒ Extended or
ƒ Standard.
The control terminals are always located in the Communication Unit.
Thetypeoffieldbusversion,powerclassoftheinverterormotorframesizehaveno
influence on the availability.
Connection options for Communication Unit WU
Plugs X3 X61 X4 X1
Name Fieldbus Safety Digital input/output Analog
input
Relay Holding
brake
Type SIA/SIB RFR DIx DO1 AI/AU COM/NO BD1/BD2
E84DGFCNNNx
NO BUS
(without
fieldbus)
- 1x 2x - -  
E84DGFCSNNx
Standard I/O
(without
fieldbus)
- 1x 5x    
E84DGFCAxNx
ASi
-
1x 5x 
- -

E84DGFCAxJx   
E84DGFCCxNx
CAN
- - -
E84DGFCCxJx   
E84DGFCGxNx
EtherNet/IP
- - -
E84DGFCGxJx   
E84DGFCPxNx
PROFIBUS
- - -
E84DGFCPxJx   
E84DGFCRxNx
PROFINET
- - -
E84DGFCRxJx   
E84DGFCTxNx
EtherCAT
- - -
E84DGFCTxJx   
 available
- not available

Lenze E84DGDVB7514 Specifications

General

Brand	Lenze
Model	E84DGDVB7514
Category	DC Drives
Language	English