Lenze E84DGFCp Series User Manual

Communication manual 8400 motec PROFIBUS
Commissioning
Possible settings via DIP switch
32 L EDS84DMOTPBUS EN 3.0 - 11/2011
Setting the station address via the »Engineer«
In the »Engineer«, the station address can be set via the Settings tab.
 Impermissible addresses are indicated in red in the Station address input field (code
C13899
).
 Save the changed settings with the device command C00002/11 (save all parameter
sets).

Lenze E84DGFCp Series Specifications

General

Brand	Lenze
Model	E84DGFCp Series
Category	Conference System
Language	English