2
EDBCSXE040 EN 6.0
Please read these instructions before you start working!
Follow the enclosed safety instructions.
These instructions are valid for the ECSxE power supply modules as of version:
ECS x E xxx x 4 x xxx XX xx xx
Type
Hans-Lenze-Straße1
D-31855 Aerzen
Made in Germany
L
Input
Output
Overload
Type
Id.-No.
2/PE DC a-aaa/aaaV
bb.b/bb.bA
3/PE AC c-ccc/cccV
dd.d/dd.dA 0-fffHz
ee.eA
ttttttttttt
Prod.-No.
Ser.-No.
yyyyyyyy
zzzz
xxxxxxxx
EKZ
A-SW
B-SW
H.H
ECSEAxxxC4BXXXXXVA02
h.h
Parameter
WARNING
Device is live up to
180s after removing
mains voltage
ATTENTION
L ´appareil est sous tension
pendant 180s après la coupure
de la tension réseau
For detailed
information refer to
the Instruction Manual
1D74
Ind.
Conl.
Eq.
1
{
}
Design
E = standard panel−mounted unit, IP20
D = push−through technique (thermally separated)
C = cold−plate technique
Rated current
012 = 12 A
020 = 20 A
040 = 38.5 A
Fieldbus interface
C = system bus CAN
Voltage class
4 = 400 V/480 V
Technical version
B = standard
I = for IT systems
Variant
Hardware version
VA or higher
Operating software version (B−SW)
1.2 or higher
Tip!
Documentation and software updates for further Lenze products can be found on the
Internet in the "Services & Downloads" area under
http://www.Lenze.com
0Fig. 0Tab. 0
To Next Page
Loading...
Need help?
General
