53
Set up the optional finisher
Step 10: Set up the
optional finisher
Note: The printer can support either a
mailbox or a finisher, but not both at the
same time.
Your printer supports an optional finisher
that adds hole punching and stapling
functions to the printer output
capabilities.
Before you can attach a finisher, you
must install either a high capacity feeder
or a base cabinet. For help setting up a
high capacity feeder or a base cabinet,
see page 9.
Note: The illustrations in this section
show the printer with a high capacity
feeder attached.
jp_setup.book Page 53 Friday, February 16, 2001 7:42 AM
To Next Page
Loading...
Need help?
General