86
Load print media
7 Slide the guide to the front until it
lightly touches the side of the
stack.
8 When finished printing from the
multipurpose feeder, remove any
print media, push the extension
guide back in, and push the
feeder to the closed position.
Loading the optional
envelope feeder
The envelope feeder holds
approximately 100 envelopes.
Note: You can load the envelope feeder
with or without the duplex unit being
attached to the printer.
1 Slide the guide all the way to the
back.
jp_setup.book Page 86 Friday, February 16, 2001 7:42 AM
To Next Page
Loading...
Need help?
General