157
Bluetooth
Pairing Bluetooth Devices
Paired Devices
The Bluetooth pairing process allows you to establish trusted
connections between your device and another Bluetooth
device. When you pair devices, they share a passkey, allowing
for fast, secure connections while bypassing the discovery and
authentication process.
To pair your phone with another Bluetooth device:
1. Verify your Bluetooth is active.
2. From the Bluetooth Settings page, checkmark
Discoverable. Your device must be visible to successfully
pair with an external device.
3. Tap Scan for Devices. (Your device will display a list of
discovered in-range Bluetooth devices.)
4. Tap a device from the list to initiate pairing.
5. Depending on the device, you might have to tap Pair to
accept the passkey (if they match on both devices) or enter
the passkey or PIN Code.
6. Tap Done > OK if you entered a passkey or PIN code or
passkey.
7. The external device will then have to accept the connection
and enter your device’s PIN code.
㻁
Once successfully paired to an external device,
appears within the Status Bar.
}t]^Wthu|hslunXXWXXXUGGGX\^ YWXXTWXTXZGGG㝘㤸G`aWWaZ_
To Next Page
Loading...
Need help?
General
