To Next Page

To Previous Page

Tools and Calendar 117

Connect a Bluetooth Headset or Car Kit

You can listen to music over a Bluetooth stereo headset, or have hands-free conversations

using a compatible Bluetooth headset or car kit. It‘s the same procedure to set up stereo audio

and hands-free devices.

To listen to music with your headset or car kit, the headset or car kit must support the A2DP

Bluetooth profile.

1. Press > > System settings > Bluetooth.

2. If Bluetooth is not switched on, touch the on/off slider to turn Bluetooth on .

3. Make sure that the headset is discoverable, so that your phone can find the headset.

Refer to the instructions that came with the headset to find out how to set it to

discoverable mode.

4. Touch Search for devices. Your phone will start to scan for Bluetooth devices within

range.

5. When you see the name of your headset displayed in the Bluetooth devices section,

touch the name. Your phone then automatically tries to pair with the headset.

6. If automatic pairing fails, enter the passcode supplied with your headset.

The pairing and connection status is displayed below the hands-free headset or car kit name in

the Bluetooth devices section. Depending on the type of headset or car kit you have connected,

you can then start using the headset or car kit to listen to music or make and receive phone

calls.

Note: Due to different specifications and features of other Bluetooth-compatible devices, display

and operations may be different, and functions such as transfer or exchange may not be

possible with all Bluetooth-compatible devices.

Reconnect a Headset or Car Kit

When you have paired a headset with your phone, you should be able to reconnect it

automatically by turning on Bluetooth on your phone and then turning on the headset. However,

sometimes you will need to reconnect manually, for example if you have been using your

headset with another Bluetooth device.

1. Press > > System settings > Bluetooth.

2. If Bluetooth is not switched on, touch the on/off slider to turn Bluetooth on .

3. Make sure that the headset is discoverable.

4. Touch the headset‘s name in the Bluetooth paired devices.

LG Volt User Manual

Other manuals for LG Volt