8. Firmware Update MMX4x2 series – User's Manual 149
Example 2
The following options are applied:
▪ Cleartext login password is applied
▪ Custom backup folder is set
▪
▪ Firmware is updated
▪
c:\Program Files (x86)\Lightware\Lightware Device Updater V2>LightwareDeviceUpdaterV2_CLI.cmd update
--ip 192.168.0.115 --package d:\Firmware\4x2\Released\MMX4x2_v1.6.4b2.lfp2 --backupFolder d:\My_backup
--clearTextLoginPw qwer1234
c:\Program Files (x86)\Lightware\Lightware Device Updater V2>lib\jre\bin\java.exe -jar lib\ldu2.jar update
--ip 192.168.0.115 --package d:\Firmware\4x2\Released\MMX4x2_v1.6.4b2.lfp2 --backupFolder d:\My_backup
--clearTextLoginPw qwer1234
[2022-03-08 13:48:10.311] [ INFO] [ main] - Device IPs: [192.168.0.115]
[2022-03-08 13:48:13.737] [ WARN] [ pool-2-thread-1] - NetworkMask property is not available. Cannot determine
whether the device is on the same network or not. Device IP: 192.168.0.115
[2022-03-08 13:48:13.793] [ WARN] [ pool-2-thread-1] - Bonjour device builder error messages: [object Array]
[2022-03-08 13:48:13.846] [ INFO] [ main] - All selected devices are available over the network.
[2022-03-08 13:48:14.125] [ INFO] [ main] - All the selected devices are compatible with the specified
package.
[2022-03-08 13:48:14.900] [ INFO] [ 192.168.0.115] - Script parameters: deviceIp: 192.168.0.115, forceNoBackup:
false, factoryDefault: false, restoreFromBackup: true, backupFolder: d:\My_backup, skipPresetsAtRestore: false,
ciscoRoomIntegration: false, updateVs100: false, uploadDefaultMiniWeb: false
[2022-03-08 13:48:14.907] [ INFO] [ 192.168.0.115] - Package version: 1.6.4b2
[2022-03-08 13:48:15.023] [ INFO] [ 192.168.0.115] - Logged in successfully.
[2022-03-08 13:48:15.058] [ INFO] [ 192.168.0.115] - Creating backup of device settings...
[2022-03-08 13:48:17.969] [ INFO] [ 192.168.0.115] - Backup HTTP enable properties
[2022-03-08 13:48:20.095] [ INFO] [ 192.168.0.115] - HTTP and HTTP post have got enabled on port 80
[2022-03-08 13:48:20.369] [ INFO] [ 192.168.0.115] - No miniweb file is found on the device.
[2022-03-08 13:48:22.466] [ INFO] [ 192.168.0.115] - HTTP and HTTP post properties have got restored on port 80
[2022-03-08 13:48:24.596] [ INFO] [ 192.168.0.115] - HTTP and HTTP post have got enabled on port 80
[2022-03-08 13:48:24.632] [ INFO] [ 192.168.0.115] - Switching device into bootload mode...
[2022-03-08 13:48:42.788] [ INFO] [ 192.168.0.115] - Gathering UID information from device...
[2022-03-08 13:48:43.052] [ INFO] [ 192.168.0.115] - UID info - Device IP: 192.168.0.115 Product name:
MMX4x2-HT200 Product part number: 91310035 Serial number: 00004302 Hardware version: V11_BAA0 MAC address:
A8:D2:36:00:43:02
[2022-03-08 13:48:43.306] [ INFO] [ 192.168.0.115] - Package version on device: 1.6.4b2 r89
[2022-03-08 13:48:43.572] [ INFO] [ 192.168.0.115] - Updating Firmware of the MCU...
[2022-03-08 13:48:43.812] [ INFO] [ 192.168.0.115] - [tps_rx200.bin]'s current version on device: 1.6.4b2 r120
[2022-03-08 13:48:43.813] [ INFO] [ 192.168.0.115] - [tps_rx200.bin]'s version in the package: 1.6.4b2 r120
[2022-03-08 13:49:07.834] [ INFO] [ 192.168.0.115] - [tps_rx200.bin]'s firmware version updated in FVS EEPROM.
[2022-03-08 13:49:13.614] [ INFO] [ 192.168.0.115] - Setting system information...
[2022-03-08 13:49:19.389] [ INFO] [ 192.168.0.115] - Starting application...
[2022-03-08 13:50:53.945] [ INFO] [ 192.168.0.115] - Restoring device settings from the following backup file:
d:\My_backup\backup_91310035_00004302_2022-03-08_13-48-15_converted.lw3 ...
[2022-03-08 13:50:57.933] [ INFO] [ 192.168.0.115] - Device settings have been restored
[2022-03-08 13:50:57.956] [ INFO] [ 192.168.0.115] - Resetting device...
[2022-03-08 13:51:02.224] [ INFO] [ 192.168.0.115] - Done
All 1 update(s) finished successfully.
Exit Codes
Code Displayed text Description
0 The update performed successfully
1 Update error (ErrorCode:1) The error happened during the update
2 The error happened before starting the update
The error line contains further information about the error.
®
c:\Program Files (x86)\Lightware\Lightware Device Updater V2\echo %errorlevel%
0
echo $?
0
If this value is queried after the update and it is 0, the update performed successfully.
To Next Page
Loading...
Need help?
General
