EasyManuals Logo
Home>LINET>Medical Equipment>Multicare

LINET Multicare User Manual

LINET Multicare
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
D9U001MC0-0101_16
17
Use the mattress system exclusively in its original state and do not modify it in any way.
Have the mattress system used exclusively by or under supervision of trained and qualied nursing per- sonnel.
Have the mattress system serviced and installed exclusively by qualied personnel trained and authorised by the
manufacturer.
Do not exceed the maximum patient weight limit (see Mechanical Specications (OptiCare or Symbioso)).
Do not use the SCU (System Control Unit) near ammable gases (This does not apply to oxygen cylinders.).
Never use the mattress replacement system near radiators or other heat sources.
Never cover the SCU while in use.
This does not apply to oxygen cylinders.
Never use the mattress replacement system near radiators or other heat sources.
Select a suitable location for the placement of bed accessories and other objects to prevent involuntary activation of
buttons or controls which may result in the adjustment of bed positioning.
Do not use the bed in the event parts have been removed (e.g. parts of mattress platform) unless these parts are de
signed to be removed (e.g. head and/ or foot board).
Never place any accessories or handset on the siderails in the area where the integrated siderail controller is located.
After each emergency situation always check if any of the controllers (in siderails, handset or ACP) is not involuntarily
pressed by the bed accessories or by the mattress.
The weighing system must be tested at regular intervals and in accordance with the metrological regulations of the
relevant country. All testing and certication must be carried out by qualied personnel. The healthcare provider is
responsible for ensuring the required testing frequency and testing procedure of the weighing system is carried out.
To avoid injury or crushing, take extra caution when operating any moving parts of the bed.
To avoid unintended activation of moving parts during any use of the bed always check that none of the control elements
of the bed is not involuntary pressed by persons, mattress or other objects.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LINET Multicare and is the answer not in the manual?

LINET Multicare Specifications

General IconGeneral
BrandLINET
ModelMulticare
CategoryMedical Equipment
LanguageEnglish

Related product manuals