GB
15
Connections
Connecting a Digital (Coaxial) Audio Receiver
For better sound quality, you may want to play the audio through your multi-channel audio receiver.
1. Use an audio cable to connect the TV's Digital (Coaxial)
audio output socket to an external audio receiver’s audio
coaxial input socket.
2. Plug the connected devices into the mains socket before
switching on the TV.
3. Press the STANDBY button on the top panel of the TV or
the
button on the remote control to turn on your TV.
4. Press the TV/AV button on the top panel of the TV or
the Source button on the remote control to display the
Source List. Use the
buttons to select any desired
input source and then press the OK button to confirm.
Rear Right Side View of TV
YPbPrDigital AV Aerial
Common Interface
Audio Cable
(not included)
Audio Receiver
Connecting Earphones
Connect your earphones to the TV’s socket.
Before putting on earphones, turn the volume down then put
the earphones on and slowly increase the volume until you
reach a comfortable listening level.
Rear Bottom View of TV
POWER HDMI SCARTVGA
Headphone out
USB PC-IN
Earphones Cable
(not included)
The TV’s volume control will have no effect. You
may control the audio level via the Audio Receiver.
Listening to loud sounds for prolonged periods of
time may permanently damage your hearing.
L23IP11_IB_Running Change110923_Annie.indd 15 11年10月13日 下午6:07
To Next Page
Loading...
Need help?
General
