Digital Inputs
MXD70 Setpoints, Current Outputs,
and Digital Inputs Configuration Guide
- 29 -
Digital Inputs
Digital Inputs
The MXD70 Series is fitted with eight digital inputs designated 1 – 8. Each individual digital input can
be assigned to any one of the Sensor Input Channels or to the instrument as a whole. The digital input
menu contains all of the necessary setup functions to configure the digital input sources. These inputs
are intended to be switched using a volt free link, switch or relay. The user can select whether closing
or opening the contact initiates the configured action.
Main Menu
From the front screen press the menu button to show
the main menu options and select Digital Inputs.
/ – Select Option
EXIT
– Return to Calibration
– Enter Option
Digital Inputs Setup
Select the Digital Input you wish to edit.
The status of the Digital Input is also shown to the left
of each item.
– Digital Input Open Circuit
– Digital Input Closed Circuit
/ – Select Option
EXIT
– Return to Main Menu
– Enter Option
Channel
The “Sensor Input Channel” the digital input is to be
associated with. The channels shown depend on the
configuration of the instrument. Alternatively if
Whole Unit is selected the action will affect all of the
input channels.
To disable the digital input select the disabled
option.
/ – Select Option
EXIT
– Cancel
– Save Selection
To Next Page
Loading...
Need help?
General
