Manitou MHT 7140 T-E3 User Manual

3-17
B3 - CONDENSER CORE (OPTION AIR CONDITIONING)
CHECK - CLEAN
In a polluting atmosphere, clean the radiator core every day. Do not use a water jet or high-pressure steam
as this could damage the condenser fins.
- Remove the protective grid 1 (fig. B3) and clean it if necessary.
- Visually check whether the condenser 2 (fig. B3) is clean and clean it if necessary.
- Clean the condenser using a compressed air jet aimed in the same direction as the air flow
(fig. B3).
NOTE: So as to enhance the cleaning, carry out this operation with the fans running.
B4 - TRANSMISSION UNIVERSAL JOINT
GREASE
- Clean and lubricate the following points with grease
(see: 3 - MAINTENANCE: LUBRICANTS AND FUEL) and
remove the surplus of grease.
1 - Lubricators of the universal joint Transmission/
Front axle (3 lubricators) (fig. B4/1).
2 - Lubricators of the universal joint Transmission/
Rear axle (3 lubricators) (fig. B4/2).
B3
2
1
B4/1
B4/2
1
1
2
1
1
1

Manitou MHT 7140 T-E3 Specifications

General

Brand	Manitou
Model	MHT 7140 T-E3
Category	Lifting Systems
Language	English