Manitowoc Grove RT9130E-2 Service And Maintenance Manual

Grove Published 11-22-2016, Control # 345-12 3-9
RT9130E-2 SERVICE MANUAL ELECTRICAL SYSTEM
3
Indicator Lights
The dash indicator lights (Figure 3-7) are located in the cab
on the front console. The lights are linked to various parts of
the crane by the control module and notify the operator when
a certain condition occurs during the operation of the crane.
When the ignition key is turned to the ACC or RUN position
the indicator lights go through all operations check to see if
the lights are working. This operation check takes about two
seconds in which all of the lights turn on and off allowing the
operator to know that the lights are working. For more
description on the front console indicator lights, refer to
Section 3 in the Operator’s Manual
Figure 3-7 Item Numbers
FIGURE 3-7
3
2
1
6
5
4
7
8
12
11
10
9
15
14
13
19
18
17
20
16
22
21
23
Item Description
1
Swing Brake Engaged
2 Parking Brake Engaged
3 Light Malfunction
4 Emergency Stop
5 Hydraulic Oil High Temperature
6 Transmission Warning
7 Low Steer Pressure
8 Left Turn Signal
9 Low Brake Pressure
10 Electronic Module Control
11
Electrical System Diagnostics
12 LCD Display
13 Engine Stop
14 Engine Warning
15
Diesel Particulate Filter, Regeneration
Required
16 Right Turn Signal
17 Disable Regeneration
18 Not used
19 High Exhaust System Temperature
20 Engine Wait to Start
21 4 Wheel Drive Engaged
22 Interaxle Locked
23 Rear Wheels Not Centered
Item Description

Manitowoc Grove RT9130E-2 Specifications

General

Brand	Manitowoc
Model	Grove RT9130E-2
Category	Construction Equipment
Language	English