Matrix mvBlueFOX3 User Manual

(ImageHeight * ( 1650 )) + ((VerticalBlank+2) * 1650 )
FrameTime = ------------ ------------
PixelClock PixelClock
FPS_max = 1
-----------------------------------
FrameTime + ExposureTime
21.2.3.3 Frame rate calculator
Frame rate calculator
Mode:
Overlapping exposure and readout (default)
Exposure and readout without overlapping
Pixel clock:
66 MHz
40 MHz
Image width: pixels
Image height: pixels
Exposure time: us
Frame rate (max): 1/s
ExposureTime > FrameTime
Note:
The exposure time step width is limited to the sensor's row time of 41.3 us and therefore
- auto exposure with very low exposure times will perform with relatively large increments
and
- exposure mode = TriggerWidth (if available) will perform with a jitter corresponding to the
row time
21.2.4 Device Feature And Property List
21.2.4.1 Gray scale version
Feature
Name
Min Max Inc
Valid
Values
Documentation
ProductFeatures
This list has been created with driver version '2.17.3'
and Firmware version '2.14.488.0'. This does NOT
imply that all these features will only be available
since these versions. They might be available in
previous ones as well.
Feature Name Min Max Inc
Valid
Values
Documentation
Camera
This list contains features to
control the device
ImageRequestTimeout_ms 0
ms
INT_MAX 1
ms
- Defines the timeout for the
request in ms. Once the
timeout has elapsed the
request object is returned to
the user even if no data has
been captured into it. A
21 Appendix A.2 CMOS specific camera / sensor data
1345

Matrix mvBlueFOX3 Specifications

General

Brand	Matrix
Model	mvBlueFOX3
Category	Digital Camera
Language	English