This means, the bottom lines of the sensor will be exposured longer! For this reason, this
mode will only make sense, if there is no ambient light and the flash duration is shorter or
equal to the exposure time.
Thus, the gray value factor of the first line, which is similar to the one of the rolling shutter, is
different to the factor of the last line:
ExposureTime2 + FrameTime
GreyValueFactor (last line) = -------------------------
ExposureTime1 + FrameTime
Feature Description
Manufacturer Aptina
Sensor name MT9J003
Max. frames per
second
7.3
Device Structure CMOS image sensor
SNR 37.2 dB
DNR (normal /
HDR)
56 dB / -
Image size 1/2.35
Number of
effective pixels
3856 (H) x 2764 (V)
Unit cell size 1.67µm (H) x 1.67µm (V)
ADC resolution /
output
12 bit â 8/10/(12)
21.7.2 Spectral Sensitivity
21 Appendix A.2 CMOS specific camera / sensor data
1817