Matrix mvBlueFOX3 User Manual

Figure 2: Assigning the digital output
Note:
You can delay the pulse if needed.
18.4.4 Creating different exposure times for consecutive images
If you want to create a sequence of exposure times, you have to trigger the camera "externally" via
pulse width:
Use Timer and Counter to build a sequence of different pulse widths.1.
Use the Counter for the time between the exposures (with respect to the readout times).2.
Afterwards, use an AND gate followed by OR gate to combine different exposure times.3.
Note:
Please be sure that the sensor can output the complete image during Counter1 or
Counter2. Otherwise, only one integration time will be used.
18 Use cases
212

Matrix mvBlueFOX3 Specifications

General

Brand	Matrix
Model	mvBlueFOX3
Category	Digital Camera
Language	English