Section 2 - Initial Screens and Setup Wizard
Page 12 90-8M0087257 eng DECEMBER 2014
Device Setup
In the Device Setup screen, use the RIGHT and LEFT arrow buttons to highlight the drop‑down menus. If using multiple
VesselView devices, be sure to assign unique numbers to each unit, to avoid data problems. Helm numbers should match the
location of the individual VesselView unit. Highlight the Next field to continue.
a - VesselView device number
b - Helm location number
Units Setup
Select the units of measure that VesselView will display on‑screen data; speed, distance, and volumes. Particular units of
measure can be changed later. After selecting the units of measure, highlight the Next field and press ENTER.
a - Units of measure drop‑down menu
To Next Page
Loading...
Need help?
General
