Section 2 - Initial Screens and Setup Wizard
90-8M0087257 eng DECEMBER 2014 Page 21
1. When the scheduled maintenance time is fully depleted, the user‑selected data area will display a general maintenance
reminder to perform the scheduled maintenance.
2. Open the + icon to expand the text. You can reset the maintenance to 100% or exit the screen.
NOTE: The wrench icon maintenance reminder will be displayed in the system status field until the fault is cleared from the
system.
3. After resetting the maintenance reminder, the wrench icon no longer appears in the system status field.
System Scan ‑ Scan Report
When a system scan is completed and there are no faults, maintenance reminders, or communication errors, the user‑selected
data area will display SCAN COMPLETE with a report and a good stewardship message. The scan report will be displayed until
the engine is put into gear or use the LEFT or RIGHT arrow button to highlight the X and press the ENTER button
• The good stewardship messages are randomly selected. Examples include: Do you have flotation devices, Mercury
reminds you to please boat safely.
To Next Page
Loading...
Need help?
General
