EasyManuals Logo

Miele PDR 908 HP User Manual

Miele PDR 908 HP
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #102 background imageLoading...
Page #102 background image
Supervisor level
102
Process technology
Anti-crease
At the end of the programme, the
drum will continue to rotate at inter-
vals if the laundry is not removed im-
mediately.
Changing this setting leads to increased
energy consumption.
The setting can be switched off or a
time between 1 and 12 hours can be se-
lected.
Factory default: Off
Drying levels
Changing this setting leads to increased
energy consumption.
You can alter the drying levels for the
Cottons, Minimumiron and Auto-
maticplus programmes.
It can be set to one of 7 different levels.
Factory default: normal
The Machine iron drying level in the
Cottons programme can be individu-
ally adapted.
You can change the residual moisture in
this programme to one of 11 levels from
16% (more dry) to 26% (more moist).
Factory default: 20%
Further cooling
Before the end of the programme, the
temperature of the dried laundry is
monitored and the cooling phase at
the end of the programme is extended
if necessary.
Changing this setting leads to increased
energy consumption.
- Factory default: Off
- On
Cooling down temperature
The laundry will be cooled down auto-
matically before the end of the pro-
gramme. The automatic cooling-down
phase which takes place before the
end of a programme can be set at a
cooler level for all programmes. This
means that the cooling phase is exten-
ded.
Changing this setting leads to increased
energy consumption.
The setting can be changed from
40°C–55°C.
Factory default: 55°C

Table of Contents

Other manuals for Miele PDR 908 HP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele PDR 908 HP and is the answer not in the manual?

Miele PDR 908 HP Specifications

General IconGeneral
Door hingeLeft
Drum volume130 L
Control typeTouch
Loading typeFront-load
Product colorStainless steel
Built-in displayYes
Custom panel-readyNo
Appliance placementFreestanding
Drying systemHeat pump
Drying capacity8 kg
Delay start (max)24 h
Residual moisture48 %
Spin-drying class-
Maximum spin speed- RPM
Noise level (drying)- dB
Door opening angle167 °
Current10 A
Connected load1440 W
Power plug typeType F (CEE 7/4)
AC input voltage220 - 240 V
AC input frequency50 Hz
Weight and Dimensions IconWeight and Dimensions
Depth777 mm
Width605 mm
Height850 mm
Weight72000 g
Package depth820 mm
Package width660 mm
Package height940 mm
Package weight78000 g
Door opening diameter370 mm

Related product manuals