Miele PDR 908 HP User Manual

Cleaning and care
66
 Use the handle to slide the fluff filter
on the right at an angle behind the
edge.
 Then press on the handle until the
fluff filter is secured in position.
Cleaning and closing the fluff fil-
ter flap
 Use a damp cloth to remove any fluff.
Make sure that you do not damage
the rubber seal when doing this.
 Close the fluff filter flap.
The plinth filter must be inserted and
the fluff filter flap must be closed to
ensure the system is correctly sealed
and that the tumble dryer will func-
tion correctly.
Cleaning the bottom right grille/
heat exchanger
The heat exchanger's cooling fins be-
hind the grille can become blocked
with dust and dirt drawn in from the
surrounding area.

Miele PDR 908 HP Specifications

General

Door hinge	Left
Drum volume	130 L
Control type	Touch
Loading type	Front-load
Product color	Stainless steel
Built-in display	Yes
Custom panel-ready	No
Appliance placement	Freestanding
Drying system	Heat pump
Drying capacity	8 kg
Delay start (max)	24 h
Residual moisture	48 %
Spin-drying class	-
Maximum spin speed	- RPM
Noise level (drying)	- dB
Door opening angle	167 °
Current	10 A
Connected load	1440 W
Power plug type	Type F (CEE 7/4)
AC input voltage	220 - 240 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	777 mm
Width	605 mm
Height	850 mm
Weight	72000 g
Package depth	820 mm
Package width	660 mm
Package height	940 mm
Package weight	78000 g
Door opening diameter	370 mm