Miele PDR 908 HP User Manual

Installation
*INSTALLATION*
82
Transporting the tumble dryer
to its installation site
 Damage caused by incorrect
transportation of the tumble dryer.
If the tumble dryer tips over, there is
a danger of injury to people and dam-
age to property.
Ensure that the tumble dryer is stable
during transportation.
Transporting the tumble dryer
 If the tumble dryer is being transpor-
ted on its side, it must be tipped onto
its left or right side.
 If the tumble dryer is being transpor-
ted upright, always transport it on a
sack truck with its left or right side
resting on the truck.
Transporting the tumble dryer to its in-
stallation site
 Danger of injury due to unsecure
lid.
The fixings at the back of the lid
could break as a result of external
forces. There is a danger of the lid be-
ing pulled off when carrying the ma-
chine.
Before carrying the machine, check
that the lid is secure where it pro-
trudes at the back of the machine.
 Carry the tumble dryer by the front
feet and by the lid where it protrudes
at the back of the appliance.

Miele PDR 908 HP Specifications

General

Door hinge	Left
Drum volume	130 L
Control type	Touch
Loading type	Front-load
Product color	Stainless steel
Built-in display	Yes
Custom panel-ready	No
Appliance placement	Freestanding
Drying system	Heat pump
Drying capacity	8 kg
Delay start (max)	24 h
Residual moisture	48 %
Spin-drying class	-
Maximum spin speed	- RPM
Noise level (drying)	- dB
Door opening angle	167 °
Current	10 A
Connected load	1440 W
Power plug type	Type F (CEE 7/4)
AC input voltage	220 - 240 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	777 mm
Width	605 mm
Height	850 mm
Weight	72000 g
Package depth	820 mm
Package width	660 mm
Package height	940 mm
Package weight	78000 g
Door opening diameter	370 mm