Miele PDR 908 HP User Manual

6. End of programme – unloading the drum
36
End of programme
The laundry will be cooled down shortly
before the end of the programme. The
laundry can be unloaded.
- Finish lights up
If Anti-crease* was selected, the
drum will rotate in intervals. This minim-
ises creasing if the laundry cannot be re-
moved from the machine immediately.
* The anti-crease function is deactiv-
ated as standard.
The tumble dryer will switch off auto-
matically 15 minutes after the end of a
programme.
Unloading the drum
 Open the door.
 Remove everything from the drum.
Items left in the tumble dryer could
be damaged by overdrying when the
tumble dryer is used the next time.
Always remove all items from the
drum.
 Switch the tumble dryer off.
Observe any maintenance
notes
This tumble dryer requires regular
maintenance, particularly if it is used
on a continuous basis.
Tip: Please see “Cleaning and care” for
details. Read the “Cleaning the appli-
ance at the correct intervals” section
first.

Miele PDR 908 HP Specifications

General

Door hinge	Left
Drum volume	130 L
Control type	Touch
Loading type	Front-load
Product color	Stainless steel
Built-in display	Yes
Custom panel-ready	No
Appliance placement	Freestanding
Drying system	Heat pump
Drying capacity	8 kg
Delay start (max)	24 h
Residual moisture	48 %
Spin-drying class	-
Maximum spin speed	- RPM
Noise level (drying)	- dB
Door opening angle	167 °
Current	10 A
Connected load	1440 W
Power plug type	Type F (CEE 7/4)
AC input voltage	220 - 240 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	777 mm
Width	605 mm
Height	850 mm
Weight	72000 g
Package depth	820 mm
Package width	660 mm
Package height	940 mm
Package weight	78000 g
Door opening diameter	370 mm