Miele PDR 908 HP User Manual

Cleaning and care
55
3. Cleaning the bottom right grille/
heat exchanger for heat dissipation
Clean only when Open bottom right
grille, clean the heat exchanger appears
in the display.
The bottom right grille can be removed.
This covers the heat exchanger for heat
dissipation.
 Keep the room where the tumble
dryer is located free from dust and
fluff. Doing so will mean that you will
rarely have to clean the grille.
 See “Bottom right grille/heat ex-
changer”.
 Check and clean the filter (in the
plinth) and the fluff filters.
 To delete the message: touch the
OKsensor control.

Miele PDR 908 HP Specifications

General

Door hinge	Left
Drum volume	130 L
Control type	Touch
Loading type	Front-load
Product color	Stainless steel
Built-in display	Yes
Custom panel-ready	No
Appliance placement	Freestanding
Drying system	Heat pump
Drying capacity	8 kg
Delay start (max)	24 h
Residual moisture	48 %
Spin-drying class	-
Maximum spin speed	- RPM
Noise level (drying)	- dB
Door opening angle	167 °
Current	10 A
Connected load	1440 W
Power plug type	Type F (CEE 7/4)
AC input voltage	220 - 240 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	777 mm
Width	605 mm
Height	850 mm
Weight	72000 g
Package depth	820 mm
Package width	660 mm
Package height	940 mm
Package weight	78000 g
Door opening diameter	370 mm