Miele PDR 908 HP User Manual

Initial commissioning
28
Confirming the time request
The following question appears in the
display:
Should the time of day display not be
shown?
 Touch the Yes or Nosensor control.
If you select Yes, the system will skip
the Clock displaysetting.
If you select No, the display will switch
to the Clock displaysetting.
Setting the time of day
OK
12 00
11 59
10 58
13 01
14 02
Clock display




 Place your finger on the number that
you want to change and move your
finger in the direction you want.
 Confirm with the OKsensor.
The display will change to the next set-
ting.
Selecting programme packages
You can select various programmes
from the programme packages.
Any programmes already active are
marked in orange.
11:02
Cottons  Cottons Express
Cottons PRO Delicates
Programme packages
Label Standard
Minimum iron
OK
 Scroll right until you reach a pro-
gramme that is not marked in orange.
 Touch the sensor for the required pro-
gramme.
The selected programme is marked in
orange; this means that the programme
is active.
 You can select further programmes.
Tip: You can disable a selected pro-
gramme by touching the programme's
sensor again.
 If you do not want to select any more
programmes, confirm with OK.
The display will change to the next set-
ting.

Miele PDR 908 HP Specifications

General

Door hinge	Left
Drum volume	130 L
Control type	Touch
Loading type	Front-load
Product color	Stainless steel
Built-in display	Yes
Custom panel-ready	No
Appliance placement	Freestanding
Drying system	Heat pump
Drying capacity	8 kg
Delay start (max)	24 h
Residual moisture	48 %
Spin-drying class	-
Maximum spin speed	- RPM
Noise level (drying)	- dB
Door opening angle	167 °
Current	10 A
Connected load	1440 W
Power plug type	Type F (CEE 7/4)
AC input voltage	220 - 240 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	777 mm
Width	605 mm
Height	850 mm
Weight	72000 g
Package depth	820 mm
Package width	660 mm
Package height	940 mm
Package weight	78000 g
Door opening diameter	370 mm