Miele PDR 908 HP User Manual

2. Load the tumble dryer
31
Loading the laundry
Preventing textile damage.
Before loading, read chapter “1.
Notes on correct laundry care.”
 Open the door.
 Load the laundry.
Preventing textile damage.
When closing the door, make sure
that laundry does not get trapped in
the door opening.
Do not overload the drum. Overloading
can cause unnecessary wear and tear
to the laundry and and cause a disap-
pointing drying result. It can also cause
more creasing.
Checking the socket for the fragrance
flacon
If you are not using a fragrance flacon,
check that the socket is closed.
The “Fragrance flacon” chapter de-
scribes how to use the fragrance
flacon.
 Push the tab down completely (see
arrow) so that the socket is closed.
Otherwise, fluff will accumulate here.
Closing the door
 Shut the door with a gentle swing.

Miele PDR 908 HP Specifications

General

Door hinge	Left
Drum volume	130 L
Control type	Touch
Loading type	Front-load
Product color	Stainless steel
Built-in display	Yes
Custom panel-ready	No
Appliance placement	Freestanding
Drying system	Heat pump
Drying capacity	8 kg
Delay start (max)	24 h
Residual moisture	48 %
Spin-drying class	-
Maximum spin speed	- RPM
Noise level (drying)	- dB
Door opening angle	167 °
Current	10 A
Connected load	1440 W
Power plug type	Type F (CEE 7/4)
AC input voltage	220 - 240 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	777 mm
Width	605 mm
Height	850 mm
Weight	72000 g
Package depth	820 mm
Package width	660 mm
Package height	940 mm
Package weight	78000 g
Door opening diameter	370 mm