Miele PDR 908 HP User Manual

Cleaning and care
65
Refitting the filter insert (in the plinth)
 Use the handle to slide the filter in-
sert to the right at an angle behind
the edge.
 Then press on the handle until the fil-
ter is secured in position on the left.
 Press the frame of the filter insert in
at the positions marked PUSH until it
audibly engages.
Refitting the fluff filter in the
plinth
 Fit the fluff filter back on the handle.
Make sure it is the correct way round.

Miele PDR 908 HP Specifications

General

Door hinge	Left
Drum volume	130 L
Control type	Touch
Loading type	Front-load
Product color	Stainless steel
Built-in display	Yes
Custom panel-ready	No
Appliance placement	Freestanding
Drying system	Heat pump
Drying capacity	8 kg
Delay start (max)	24 h
Residual moisture	48 %
Spin-drying class	-
Maximum spin speed	- RPM
Noise level (drying)	- dB
Door opening angle	167 °
Current	10 A
Connected load	1440 W
Power plug type	Type F (CEE 7/4)
AC input voltage	220 - 240 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	777 mm
Width	605 mm
Height	850 mm
Weight	72000 g
Package depth	820 mm
Package width	660 mm
Package height	940 mm
Package weight	78000 g
Door opening diameter	370 mm