Miele PDR 908 HP User Manual

Cleaning and care
62
Deformation
Deformations indicate that the filter has
become blocked and worn by continu-
ous use.
Cracks, tears, indentations
Fluff will blow into the heat exchanger
through cracks and tears and will cause
obstruction.
Indentations indicate that the filter has
become blocked and worn by continu-
ous use.
White residues or residues of other col-
ours
Residues arise from laundry fibres and
traces of detergent components which
can clog the filter. They can be found on
the front and side edges of the filter. In
extreme cases, they can form stubborn
crust.
Residues are a sign that the filter is no
longer a snug fit at the sides, even if it
appears to be perfect: fluff is getting in
unfiltered at the edges.
If these residues appear on the filters
again soon after cleaning, the filter must
be replaced.

Miele PDR 908 HP Specifications

General

Door hinge	Left
Drum volume	130 L
Control type	Touch
Loading type	Front-load
Product color	Stainless steel
Built-in display	Yes
Custom panel-ready	No
Appliance placement	Freestanding
Drying system	Heat pump
Drying capacity	8 kg
Delay start (max)	24 h
Residual moisture	48 %
Spin-drying class	-
Maximum spin speed	- RPM
Noise level (drying)	- dB
Door opening angle	167 °
Current	10 A
Connected load	1440 W
Power plug type	Type F (CEE 7/4)
AC input voltage	220 - 240 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	777 mm
Width	605 mm
Height	850 mm
Weight	72000 g
Package depth	820 mm
Package width	660 mm
Package height	940 mm
Package weight	78000 g
Door opening diameter	370 mm