Miller Auto-Line Invision 352 MPa User Manual

TM-246193 Page 25
Invision 352 MPa
6-5. Pulsed MIG - Wire and Gas Selection Table
WIRE TYPES** GAS TYPES
Steel
.035 (0.9) STL
.045 (1.2) STL
ARGN CO2 (ARGON / CARBON DIOXIDE)
80 ARGN CO2 (ARGON / CARBON DIOXIDE)
ARGN OXY (ARGON / OXYGEN)
Steel 100S
.035 (0.9) STL
.045 (1.2) STL
100S C5 (95 ARGON / 5 CARBON DIOXIDE)
Metal Core
.045 (1.2) MCOR
.052 (1.4) MCOR
ARGN CO2 (ARGON / CARBON DIOXIDE)
Stainless Steel
.035 (0.9) SSTL
.045 (1.2) SSTL
TRI MIX (TRI-GAS MIXTURE)
ARGN OXY (ARGON / OXYGEN)
ARGN CO2 (ARGON / CARBON DIOXIDE)
Aluminum
.035 (0.9) AL4X (4000 Series)
.040 (1.0) AL4X (4000 Series)
3/64 (1.2) AL4X (4000 Series)
1/16 (1.6) AL4X (4000 Series)
ARGN (ARGON)
.035 (0.9) AL49 (4943)
.040 (1.0) AL49 (4943)
3/64 (1.2) AL49 (4943)
1/16 (1.6) AL49 (4943)
.035 (0.9) AL5X (5000 Series)
.040 (1.0) AL5X (5000 Series)
3/64 (1.2) AL5X (5000 Series)
1/16 (1.6) AL5X (5000 Series)
ARGN (ARGON)
HE AR25 (HELIUM/ARGON)
Nickel
.035 (0.9) NI
.045 (1.2) NI
ARGN HE (ARGON / HELIUM)
ARGN (ARGON)
Copper Nickel
.035 (0.9) CUNI
.045 (1.2) CUNI
HE ARGN (HELIUM / ARGON)
Silicon Bronze
.035 (0.9) SIBR
.045 (1.2) SIBR
ARGN (ARGON)
Titanium
.035 (0.9) TI-5
.045 (1.2) TI-5
ARGN HE25 (75 ARGON / 25 HELIUM)
.035 (0.9) TI-5
.045 (1.2) TI-5
ARGN HE50 (50 ARGON / 50 HELIUM)
**Wire diameter in inches (mm). Refer to section 5-2 to change displayed units.
 Other normal gas mixtures can be used by adjusting arc length and sharp arc. Use the program closest to your gas mixture and wire type
and size.
Notes

Miller Auto-Line Invision 352 MPa Specifications

General

Brand	Miller
Model	Auto-Line Invision 352 MPa
Category	Inverter
Language	English